|
 |
|
|
| 260 - Isover IBR |
 |
|
| type |
thickness [mm] |
sizes |
m2 for rolls |
m2 for pallets |
| IBR N |
50 |
1,20x13 |
15,60 |
374,40 |
| |
60 |
1,20x12 |
14,40 |
345,60 |
| |
80 |
1,20x9 |
10,80 |
324,00 |
| |
100 |
1,20x7 |
8,40 |
302,40 |
| IBR Kraft |
50 |
1,20x13 |
15,60 |
374,40 |
| width: 1,20m |
60 |
1,20x12 |
14,40 |
345,60 |
| |
80 |
1,20x9 |
10,80 |
324,00 |
| |
100 |
1,20x7 |
8,40 |
302,40 |
| |
120 |
1,20x7 |
8,40 |
201,60 |
| |
140 |
1,20x6 |
7,20 |
172,80 |
| |
160 |
1,20x5,5 |
6,60 |
158,40 |
| |
180 |
1,20x5 |
6,00 |
144,00 |
| |
200 |
1,20x4,5 |
5,40 |
129,60 |
| IBR Kraft |
50 |
1,00x13 |
13,00 |
312,00 |
| width: 1,00m |
60 |
1,00x12 |
12,00 |
288,00 |
| |
80 |
1,00x9 |
9,00 |
270,00 |
| |
100 |
1,00x7 |
7,00 |
252,00 |
| |
120 |
1,00x7 |
7,00 |
168,00 |
| |
140 |
1,00x6 |
6,00 |
144,00 |
| |
160 |
1,00x5,5 |
5,50 |
132,00 |
| |
180 |
1,00x5 |
5,00 |
120,00 |
| |
200 |
1,00x4,5 |
4,50 |
108,00 |
| IBR Contact |
100 |
1,20x8 |
9,60 |
345,60 |
| |
200 |
1,20x4,50 |
5,40 |
194,40 |
|
| Thermal resistance |
| thickness [mm] |
50 |
60 |
80 |
100 |
120 |
140 |
160 |
180 |
200 |
| R [m2K/W] |
1,25 |
1,50 |
2,00 |
2,50 |
3,00 |
3,50 |
4,00 |
4,50 |
5,00 |
|
| Thermal conductivity at average temperature of10°C: l = 0,040 W/m°K |
| Flame resistance (IBR N): Euro-class A1 |
| Flame resistance (IBR Kraft, IBR Contact): Euro-class F |
| Steam resistance (IBR Kraft, IBR Contact): 1 m2hPa/mg |
Glass-wool felt for thermal and acoustic insulation of civil and industrial coverings.
IBR Range
IBR N: bare glass-wool felt
IBR Kraft: glass-wool felt finished on one side with kraft paper bonded with bitumen
IBR Contact: glass-wool felt finished on one side with kraft paper bonded with bitumen and on the other side and edges with soft-touch TNT
The advantages of IBR felt
• the protective solution against cold, heat and noise
• unrolls instantly when the packaging is opened
• easy transport
• easy and fast installation
• very compact
|
|
|
|
 |
| 262 - Isover Roofix |
|
|
| R* (10°C) [m2K/W] |
|
s [mm] |
L [m] |
I [m] |
| 1,80 |
|
60 |
1,2 |
0,6 |
| 1,50 |
|
50 |
1,2 |
0,6 |
| 1,20 |
|
40 |
1,2 |
0,6 |
| 0,90 |
|
30 |
1,2 |
0,6 |
| |
|
Stiff panels in extruded polystyrene for the insulation of coverings and curtain walls.
|
|
Available in types: N normal coating, BT weather-board coating, IN uncoated, with square edges, MF** coated, with fixed joint edges.
|
| Flame resistance: Euro-class E. |
| Thermal conductivity at average temperature of10°C: l = 0,033 W/m°K. |
| ** Roofix MF size 2,80x0,60m |
|
|
|
|
| 266 - Isover Rollo CE |
|
|
| type |
|
|
thickness [mm] |
size |
| Rollo |
|
|
50 |
1,00x14,00 |
| Rollo |
|
|
50 |
1,20x14,00 |
| Rollo K |
|
|
50 |
1,20x14,00 |
| Rollo |
|
|
60 |
1,00x12,50 |
| Rollo |
|
|
60 |
1,20x12,50 |
| Rollo K |
|
|
60 |
1,00x12,50 |
| Rollo K |
|
|
60 |
1,20x12,50 |
| Rollo K |
|
|
80 |
1,20x9,00 |
| Rollo K |
|
|
90 |
1,00x14,00 |
| Rollo K |
|
|
100 |
1,20x7,50 |
| |
| Thermal resistance |
| thickness [mm] |
50 |
60 |
80 |
100 |
| R (10°C) [m2/KW] |
1,10 |
1,35 |
1,75 |
2,20 |
| |
|
Fibreglass felt treated with thermosetting resins, covered on one side with kraft paper (ISOVER ROLLO K felt). Available also without sheathing (ISOVER ROLLO felt).
|
|
The Isover Rollo CE felts, wound with shrink-wrapped polythene, are available loose or palletised overcompressed.
|
|
The overcompression allows to transport a greater number of rolls at the same loading volume of the vehicle and a lower storage overall dimension with a clear cost saving.
|
|
The availability of loose rolls completing the load allows to deliver an exact quantity of square meters on the yard.
|
|
Guaranteed thermal performances.
|
|
Utilisation: thermal and acoustic insulation of industrial coverings.
|
|
Packaging: reels wrapped in heat-shrink polyethylene - bulk or on pallets.
|
|
|
|
|
| 263-Bituver Tender |
|
|
| type |
reinforcement |
thickness [mm] |
m2 for pallets |
| K3V |
glass film |
3,0 |
250 |
| K4V |
glass film |
4,0 |
230 |
| K4VP * |
glass film + polyester |
4,0 |
230 |
| K3P |
polyester |
3,0 |
250 |
| K4P |
polyester |
4,0 |
230 |
| * available on request |
Plastomeric waterproof membranes, with reinforcement in glass film or continuous thread polyester; also available with double support in film and polyester.
Utilisations:: waterproofing of flat or inclined coverings with any kind of bearing structure, underground structures, etc.
|
|
|
|
|
| 264-Bituver Litoguaina LB / LC |
|
|
| type |
reinforcement |
thickness [mm] |
m2 for pallets |
| LB 30V |
glass film |
3,0 |
230 |
| LB 35P 2000 |
polyester |
3,5 |
280 |
| LB 40P 2000 |
polyester |
4,0 |
250 |
| LB 45P 2000 |
polyester |
4,5 |
230 |
| LC 40P 2000* |
polyester |
4,0 |
250 |
| * available on request |
Plastomeric lithosheaths with cold flexibility of -5°C, reinforced with glass film or polyester. The LC range consists of self-protected membranes with coloured slate scabbling (available in white, red, green).
Utilisations::
Litoguaina LB: as a final layer or for anchoring the tiles, on pitch covering.
Litoguaina LC: as a final layer on coverings with special aesthetic requirements.
|
|
|
|
|
| 265-Bituver Aluvapor |
|
|
| type |
reinforcement |
thickness [mm] |
m2 for pallets |
| Aluvapor |
glass film + aluminium |
2,0 |
460 |
| |
Plastomeric polymer-bitumen waterproof membrane, reinforced with a glass film and an aluminium embossed lamina of 80 μm.
Utilisations: as vapour arrester on insulated coverings and/or coverings with metallic self-protection.
|
| Roll size: m 1 x 20 |
|
|
|
|
| 266-Mupan |
|
|
| type |
|
|
thickness [mm] |
size |
| MUPAN |
|
|
40 |
0,6x1,4 |
| MUPAN K |
|
|
40 |
0,6x1,4 |
| MUPAN |
|
|
50 |
0,6x1,4 |
| MUPAN K |
|
|
50 |
0,6x1,4 |
| MUPAN |
|
|
60 |
0,6x1,4 |
| MUPAN K |
|
|
60 |
0,6x1,4 |
| |
| Thermal resistance |
| thickness [mm] |
|
40 |
50 |
60 |
| R (10°C) [m2/KW] |
|
1,10 |
1,40 |
1,65 |
| |
| Thermal conductivity at average temperature of 10°C λ=0,036 W/mk |
|
Self-supporting, non-hydrophilic glass wool panel treated with a special heat-hardening resin binder. Available products: MUPAN with two-ply Saint-Gobain vetrotex glass sheathing and MUPAN K with glass Saint-Gobain vetrotex glass on one side and bituminous paper on the other.
|
|
Packaging: in over-compressed packs wrapped in heat-sealed polyethylene with six faces - available in bulk or on pallets.
|
| Euro-classes: MUPAN Ar S1 do, MUPAN K F |
|
Utilisations: thermal and acoustic insulation for hollow walls.
|
|
|
|
|
| 267-BAC 2000 HP |
|
|
| type |
|
|
thickness [mm] |
size |
| BAC 2000 HP |
|
|
30 |
1,00x1,20 |
| BAC 2000 HP N |
|
|
30 |
1,00x1,20 |
| BAC 2000 HP |
|
|
40 |
1,00x1,20 |
| BAC 2000 HP N |
|
|
40 |
1,00x1,20 |
| BAC 2000 HP |
|
|
50 |
1,00x1,20 |
| BAC 2000 HP N |
|
|
50 |
1,00x1,20 |
| BAC 2000 HP |
|
|
60 |
1,00x1,20 |
| BAC 2000 HP N |
|
|
60 |
1,00x1,20 |
| |
| Thermal resistance |
| thickness [mm] |
30 |
40 |
50 |
60 |
| R (10°C) [m2/KW] |
0,75 |
1,00 |
1,30 |
1,55 |
| |
| Thermal conductivity at average temperature of 10°C λ=0,037 W/mk |
|
High-density, non-hydrophilic glass wool panel treated with heat-hardening resins. Available product types:
|
| BAC 2000 HP sheathed on one face with a thick bitumen layer reinforced with glass film and polypropylene film finishing. |
| BAC 2000 HP N bare |
|
Packaging: polyethylene-wrapped packs on pallets.
|
| Euro-classes: BAC 2000 HP N, BAC 2000 HP F |
|
Utilisations: hermal and acoustic insulation roof lagging with bituminous under-sheath (BAC 2000 HP) and synthetic mantle (BAC 2000 HP N).
|
|
|
|
|
| 268-Vapo light |
|
|
|
Bituminous under-tile polyester sheathing with elastomer-impregnated fabric sheathed on both sides with a special polypropylene-based fabric.
|
|
Packaging: packed reels stacked vertically on pallets.
|
| Sizes: 1,00 x 30,00 m |
| Thickness: 0.60 mm |
| Weight: 550 g/m2 |
| Vapour permeability: μ = 26825 |
|
Utilisation: under-tile vapour barrier / protective layer for ventilated and non-ventilated sloping roofs on cement or wood structures.
|
|
|
|
|
| 269-Synto light |
|
|
|
Synthetic under-tile sheathing with a sheet of "breathing" polyethylene faced on both sides with a dyed polypropylene-based film permeable to vapour but impermeable to water.
|
|
Packaging: individual bag-packed reels.
|
| Sizes: 1,50 x 50,00 m |
| Thickness: 0.75 mm |
| Weight: 150 g/m2 |
|
Utilisation: under-tile protective layer for ventilated and non-ventilated sloping roofs on wood or brick/concrete structures.
|
|
|
|
|
| 270-Fonas tex |
|
|
|
Thick felt with one side having partial-saturation impregnation with a specially designed mix and finished with polypropylene-based fabric.
|
|
Packaging:: reels wrapped in kraft paper packed on pallets with heat-sealed polyethylene.
|
| Sizes: 1,00 x 2,00 m |
| Thickness: 2.8 mm |
|
Utilisation:acoustic insulation for floors.
|
|
|
|
|
| 280-Genus Soft anticondensate felt |
|
| hot air + temperature |  | | hot air + humidity |
|
On the inner part of the Genus 800, Genus 900, Genus 1000 and Genus 2000 profiles, it is possible to apply a Genus Soft felt able to endure the accumulation of condensate left by the metallic cover during the most critical moments of the day. Thanks to its excellent physical characteristics, the felt can also be used as:
• acoustic barrier for the noise caused by weather agents
• dielectric bus bar for avoiding the electrolytic torque phenomena.
Genus Soft s based on a structure of fibre deriving from the microsphere technology. The structure of fibres - microspheres is able to absorb more than 900 grams of water condensate per square meter (according to the roof inclination).
|
|
|
|
|
| 290-Polyethylene finishing (3 mm ca) |
|
|
|
Used for sharply reducing the noise caused by weather agents,
apart from eliminating the condensate phenomena.
|
|
|
|
|
| 300-Transpiring undermantle sheath |
|
|
Sepa sec® and Perno sec® : ranspiring undermantle sheaths to be laid between the boarding and the metallic covering, fit for the ventilated and non-ventilated one.
This product is the leader on the German market. The setting-up of the sheath is simple since it is easy to transport, cut and lay. With a little bit of practice, one can lay about 50 m2 per hour.
Thanks to the special Air Grip® both sides adhesive tape, you obtain an (overlapping) junction resistant to the wind and to bad weather. This product is based on modified butyl rubber, it does not contain solvents, halogens or silicone and it is bitumen and chlorine-free; it can be laid at a temperature of +5°C.
|
|
|
|
|
|
|
|
